• MagPlay Decal
• MDF Board
• Cleaning cloth (not included)
• Flat Tool (not included)
• Adhesive strips or mounting tape (not included)

• Remove your MagPlay decal from the tube and open it flat
• Use a table or floor to place the MDF board flat. 
• Ensure the MDF board is clean and free from dust or debris.
• Wipe the board with a DRY cloth.

• Carefully peel the MagPlay Decal from its backing, starting from the bottom corner.
• Ensure precise alignment by checking that the edges are perfectly even along the side and bottom corners.
• As you peel, slowly press the decal onto the MDF board, avoiding air bubbles. You can use a flat tool or a cloth. The more you press more it sticks. 
• Pay extra attention to the edges of the decal, ensuring they are securely adhered to the MDF board.

• Use adhesive strips or mounting tape to secure the board to the wall. Follow the manufacturer's instructions for the adhesive.
• We recommend between 6 -8 adhesives evenly placed through the board. Min weight for the adhesive type is 5KG.
• Clean the wall with a dry Cloth. 
• Choose your spot. Apply the MDF to the board, add pressure to make sure the board is secured in place. 

• Before finalising the placement, double-check the alignment and if the board is secured on the wall.
• Follow instructions of the adhesive mounting tape manufacturer ( as we don’t provide the tape). 
• Once the MagPlay Decal is securely applied to the MDF board, you're ready to enjoy a world of creative play!

Easy Fix:

In cooler weather, the adhesive on your decal especially along the edges can become firm, making it harder to stick smoothly.

1. Set your hair dryer to low heat only.
2. After aplying the decal to the board. Hold it a short distance from the decal edge and apply gentle heat for 1–2 minutes.
3. While the edge is still warm, press it firmly back onto the wall or board using your hand or a soft cloth.
4. Smooth out any lifted sections so they blend seamlessly.
   

Important: Always keep the hair dryer on a low setting and avoid holding it too close. This prevents heat damage or burning to the front surface of the decal.

Result: The gentle warmth softens and re-activates the adhesive, helping the edge stick securely again. voilà! and unforgettable moments.

Make sure your kids are supervised during play and they meet the age group requirements for each activity.